MEC 7000 A Hardware + WinMWA Software MEC 7000 A + WinMWA The MEC 7000 A electronics and the WinMWA software represent one of the latest state-of-the-art technologies for roundness and waviness evaluation. The search for better methods of quality control is a continuous process. SKF is in the forefront of this development. This is
Test and measuring equipment As a major engineering company, SKF needs to make sure that it provides products and services that meet its own high standards. Measurement and quality-assurance systems, based at our own Quality Technology for test and measuring equipment (QT), have provided the means to do that for the last 30 years. Today,
Automated hydraulic tensioner systems Command system-driven for safe and secure tightening Associating hydraulic tensioners with a command, regulation and control system makes it possible to automate tightening and make it secure. This helps to ensure uniform and precise tension tightening, thanks to the measuring and control means used. The handling phases (studs, nuts, etc.) can
Hydrocam HTQR “Quick Connect” A patented bolt tensioner with numerous advantages The Hydrocam HTQR “Quick Connect” tensioner is an SKF-patented solution. This latest generation hydraulic tensioner is faster, more secure and reliable, and easier to use. These numerous advantages make it a much more economical solution. 30% faster than a standard bolt tensioner Increased safety,
Custom hydraulic bolt tensioners A solution that meets your specific requirements Our standard hydraulic tensioners might not always be suited to your application. So, to meet your requirements, SKF can adapt a hydraulic tensioner from its standard range and design a made-to-measure tensioner. This specific added value makes it possible to extend the range of
Hydraulic tensioners for standard bolts The choice of tensioner depends on the class and diameter of the bolt, the desired residual tightening force and the space available. The hydraulic tensioner is powered by a hydraulic fluid – oil or water. It exerts a great traction force on the bolt and functions at pressures that can
Hydraulic tension tightening For reliable, uniform and fast industrial tightening Bolted assemblies are without a doubt the most widely used mechanical connecting systems. We know that amongst the different causes of failure (overloading, design flaw, manufacturing defect, etc.), the most frequent one is poor assembly. It is therefore essential to have perfect control over the
Other couplings and transmission products A wide range of couplings, as well as other transmission products, are available at the SKF Power Transmission website.
Mounting and dismounting Mounting Mounting sequence (fig 1) Check to see that the locking screws do not protrude from the rear of the nut. Tighten the nut on to the inner sleeve as far as it will go. Thread the outer sleeve on to the inner until it abuts the nut. Note that the outer
Transmission capacity The table gives the required minimum hub diameter (Dhub) for various materials when the SH bushing is completely covered by the hub (fig 1). fig 1 Designation example Bushing with slotted outer components for 20 mm shaft = SHT 20. Width of hub smaller than bushing If the width of the hub is smaller than