Address : 50 Raffles Place Land
Tower Singapore
Call Us : +65 31591871
Mail Us : [email protected]
Office Time : Monday to Sunday
08:00 - 20:00

Flanged housings, FNL series

Flanged housings, FNL series

FNL flanged housings

FNL flanged housings are well-proven machine parts that provide simple, reliable housing in applications without horizontal frames. They enable the full service life potential of the incorporated bearings to be exploited with less need for maintenance.

Features and benefits

fig. 1

fig. 2

fig. 3

Simple mounting

Lines cast into the housing flange indicate the centre of the housing bore. Dimples indicate the position for dowel pins (fig. 1).

Grease guiding system

An integrated flange guides grease from the grease fitting into the bearing (fig. 2).

Low friction seals

A low friction, double-lip seal on each side of the housing keeps grease in and contaminants out (fig. 3). These seals allow rotational speeds twice that of traditional felt seals.

Two predrilled holes for relubrication

The centered hole enables relubrication via a lubrication feature in the bearing. The offset hole enables relubrication from the side.

FNL housings in brief

Bearing types

Self-aligning ball bearings

Spherical roller bearings

CARB toroidal roller bearings

Bearing dimension series

02, 22

Shaft diameter range

20 to 100 mm

Typical shaft-bearing combinations

Plain shaft with bearing on an adapter sleeve

Seals

Double-lip

Lubrication

Grease

Materials

Grey cast iron

Mounting

Three-bolt mounting

Four-bolt mounting

Compliance to standards

Not standardized

Supersedes

7225(00)